BAUMANN-WOHLENBERG

      Loaders

Baumann BB

Automatic destacking of reams and automatic transport towards the high-speed cutter.

Rear-table loading

Baumann Loaders typically load the high-speed cutter via the rear-table. The destacked reams are transported towards the cutter either by a pushing unit "BTE" or by a gripper transport system "BFS".

Front-table loading

When front table loading is desired, the destacked ream is transported semi-automatically towards the cutter either by pusher or manually by the operator.

Features

  • Possible destacking systems
  • Reflective wedge (destacking exactly the pre-defined ream)
  • Long separating strips (E-System, destacking exactly the pre-defined ream)
  • Short separating strips (destacking exactly the pre-defined ream)
  • Light-barrier, which is adjusted to the requested ream height (destacking roughly the requested ream, destacking of exactly the pre-defined ream is not possible)
  • Installation
  • Longitudinal installation (the loader takes up the ream at its smaller side)
  • Installation at an right angle (the loader takes up the ream at its larger side)

Options

  • Double gripper for larger formats
  • Maximum pile height 1800 mm or 2100 mm
  • Calculation of the optimum ream height with respect to the given pile height

Application

  • Paper
  • Plastic
  • Chipboard or heavy cardboard
  • Printing Plates

Advantages

  • Very high automation level
  • All relevant parameters can be adjusted to suit the product from the operator’s panel
  • Solid and precise construction
  • Automatic destacking of small formats is possible
  • Universal application



BB3 BB5 BB6
Format [mm] 770 x 1070 920x1300 1050x1450
Max. ream weight [kg] 150 150 300
Ream height [mm] 160(200)* 160(200)* 160(200)*
Pile height [mm] 1400/1800 1400/1800 1400/1800

BB7
BB10
Format [mm] 1250x1650
1525x2050
Max. ream weight [kg] 300
300
Ream height [mm] 160(200)
160(200)
Pile height [mm] 1400/1800
1400/1800