KODAK

      TRENDSETTER Q1600 Platesetter

            Affordable Quality and Reliability

Film Imaging Option

Expand your capabilities with the Film Imaging Option for DITR thermal film. This includes hardware required for film imaging, including film registration sensors and indicators, debris collection system, and external venting system.
 
General Specifications
Technology 830 nm thermal imaging platesetter, semi-automatic, external drum
Load/unload systems Semi-automatic plate loading and unloading
Performance Specifications
Throughput at 2400 dpi 1,2  for plate size 1,650 x 1,325 mm
  • F speed = 7 plates per hour
  • X speed = 14 plates per hour
Throughput at 2400 dpi 1,2  for plate size 1,030 x 800 mm
  • F speed = 12.8 plates per hour
  • X speed = 21.8 plates per hour
Repeatability 3 ± 8 microns between two consecutive exposures on the same plate left on the drum
Accuracy 3 ± 30 microns accuracy of image size and shape
Registration 3 ± 25 microns between image and plate edge at registration points
Workflow connectivity
  • Standard  XPO TIFF Downloader Software (included) connects to most third-party workflow systems.
  • KODAK PRINERGY Workflow, and connection to third-party workflow systems.
Imaging specifications
Resolution
  • Standard: 2400/1200 dpi
  • Optional: 2540/1270, 4800, 5080 dpi
Screening
  • 450 lpi max line screen
  • Optional: 25- or 20- micron KODAK STACCATO Screening
Maximum plate size:around x along drum 4 1,325 x 1,650 mm
Minimum plate size:around drum x along drum 4 394 mm x 394 mm
Maximum image area: around x along drum 1,314.9 x 1,650 mm
Physical characteristics
Size (H x W x D) 120 x 254 x 181 cm
Weight 990 kg

1  Imaging speed and throughput is dependent on media sensitivity. All values are for media sensitivity of 130mJ/cm 2

2  Tested with KODAK Workflow Solutions. For additional information about the test conditions, please consult your Kodak representative.

3  Specifications pertain to performance at largest plate size, over full temperature range.

4  Standard plate gauge is 0.2 to 0.4 mm.

The platesetter is a Class 1 Laser Product and fully complies with EN60825-1 and US Federal Regulations 21 CFR 1040.10 - CDRH.