For Noortec, training has always been of particular importance and has so far held a variety of training courses to enhance the knowledge in the printing industry. These tutorials are in addition to operator training of devices that are held when installing them.
After installing the machine, we train your operators, these trainings will continue to the extent that we ensure that operators are professionally able to operate the machine.
Noortec's specialists have held training courses in operators and workflow programs whenever customers are needed.
In the summer of 2022, Noortec Academy began planning for various courses. It defined and developed several courses. Two titles of this educational program were held in October (in the form of three one-day workshops) and November 2022.
ُShekat-e Chap o Nashr-e Bank-e Melli Iran
This course was held in 3 days. It began on July 1st 2023.
7 persons from prepress site of Shekat-e Chap o Nashr-e Banke-Melli Iran attended in the course.
.png)
Vazheh Pardaz-e Andisheh
This course was held in 4 days (Thursdays) and totally took 30 hours.
3 People have attended in this course.
Topics:
- Basics of Prepress
- Plates structure
- Prinergy Rip and how to get the optimum results.
Noortec Academy
Second workshop of Noortec Academy was held on 5 Nov. 2022 in Noortec.
In this workshop 5 people from various printing companies had been attended.
Topics:
- Paper and its Structure
- Dampening System and its related problems
- Powder System and its related problems
Noortec Academy
The first workshop of Nooetec Academy was held in 23 Sept. 2022 and been repeated 2 extra days. Totally 28 persons had attended in these workshops.
Topics:
- Quality Control of Plates.
- Quality Control of Chemicals
- How to work properly with plate processor.
- Measuring the quality of plates with its related tools.
Anil Pack
This course was held in May 2022 in Anil Pack- Isfahan.
Operating of Kooenig & Bauer ُSheetfed Offset Machine and 7 operators have been attended in it.
Topics:
- Introduction of various parts of press machine
- How to obtain best quality.
- How to reduce the waste.
Asan Pack
This course was held in Jan. 2022 in Asan Pack- Qazvin.
Operating of Kooenig & Bauer ُSheetfed Offset Machine and 7 operators have been attended in it.
Topics:
- Introduction of various parts of press machine
- How to obtain best quality.
- How to reduce the waste.
Teram Chap-e Sepahan
This course was held in Dec. 2021 in Teram Chap-e Sepahan
It was about operating of Kooenig & Bauer ُSheetfed Offset Machine and 5 operators have been attended in it.
Topics:
- Introduction of various parts of press machine
- How to obtain best quality.
- How to reduce the waste.
Payam-e Noor Publication
This course was held in 2020 in Teram Chap-e Sepahan
It was about 0perating of Kooenig & Bauer ُSheetfed Offset Machine and 15 operators have been attended in it.
Topics:
- Introduction of various parts of press machine
- How to obtain best quality.
- How to reduce the waste.
Term Chap
This trainig course was held in 2020 and took 3 weeks.
Topics:
- Introduction to Logotronic
- Working with Optimus Logotronic
- Creating a local SIM based on Optimus Logotronic
Asan Pack
This course was held on 2020 in Asan Pack and 15 persons were attended in it.
Topics:
- Introduction various parts of platesetter & plate processor.
- Introduction the Prinergy Rip.
- How to improve the plate's quality and reduce costs.
Akhtar-e Shomal
Training of Platesetter, Plate Processor, and Prinergy Rip in Akhtar-e Shomal began on 30 December 2019 and lasted until 8 January 2020. 5 Akhtar Shomal personnel attended in this training course.
Topics:
- Introduction various parts of platesetter & plate processor.
- Introduction the Prinergy Rip.
- How to improve the plate's quality and reduce costs.
Vazheh Pardaz Andisheh
This training course was held in Oct. 2018 and took 48 hours.
Topics:
- Effects of Paper on Print Quality
- Color Management
- Problems Occur when Printing
-
Problems Occur After Printing
- Effects of Consumables on Printin
Vazheh Pardaz Andisheh
This training course was held in Oct. 2018 and took 42 hours.
Topics:
- Introducing Paper, Cardboard
- Setting of Feeder, Printing unit, Varnish and Delivery
- Diagnosis of Press Machine and Peripherals
- Maintenance
Vazheh Pardaz Andisheh
This training in Vazheh Pardaz- Andisheh was held in Oct. 2018.
Topics:
- Defining Training Syllables according to evaluation
- Holding Courses- Theorically and Practically
- Re- Evaluation of Attendees
Chap-o-Nashr-e Ketab haye Darsi
This course was held in 22 August 2019 and took 5 days. 4 persons were attended in the course.
Topics:
- Introduction various parts of platesetter & plate processor.
- Introduction the Prinergy Rip.
- How to improve the plate's quality and reduce costs.
Rooznameh Rasmi
This course was held in 28 Dec. 2018 and took 6 days. 2 persons were attended in the course.
Topics:
- Introduction various parts of platesetter & plate processor.
- Introduction the Prinergy Rip.
- How to improve the plate's quality and reduce costs.
Vazheh Pardaz-e Andisheh
This course was held in 5 Oct. 2018 and took 5 days. 3 persons were attended in the course.
Topics:
- Introduction various parts of platesetter & plate processor.
- Introduction the Prinergy Rip.
- How to improve the plate's quality and reduce costs.
Anil pack
This training course was held in 2018 and took 60 hours. 5 persons have attended in the course.
Topics:
- Introduction to Optimus
- Working with Optimus.
- Creating a local SIM based on Optimus.
Teram Chap
This trainig course was held in 2018 and took 60 hours. 5
persons
have attended in the course.
Topics:
- Introduction to Optimus
- Working with Optimus.
- Creating a local SIM based on Optimus.
Gharb Carton- Kermanshah
This course was held in 13 April 2018 and took 4 days. 2 persons were attended in the course
Topics:
- Introduction various parts of platesetter & plate processor.
- Introduction the Prinergy Rip.
- How to improve the plate's quality and reduce costs.
Teram Chap-e Sepahan
This course was held in March 2018 and took 4 days.
Topics:
- Introduction various parts of platesetter & plate processor.
- Introduction the Prinergy Rip.
- How to improve the plate's quality and reduce costs.
Vazheh Pardaz-e Andisheh
This training course was held in 2017. It was repated 3 times in a period of 10 days.
Topics:
- Introduction to Optimus
- Working with Optimus.
- Creating a local SIM based on Optimus.
Teram Chap-e Sepahan
This course was held in March 2018 and took 4 days
Topics:
- Introduction various parts of platesetter & plate processor.
- Introduction the Prinergy Rip.
- How to improve the plate's quality and reduce costs.
Vazheh Pardaz-e Andisheh
This training Course was held in 2015 and had 10 attendees.
Topics:
- Introduction to PrintX.
- Working with PrintX .
- Creating a local SIM based on PrintX
To install this Web App in your iPhone/iPad press
and then Add to Home Screen.
