Blog Posts | Noortec

Home

Cleaning the Machines is Very Important.

November 2024- 1152 views

The most common issue that makes industrial machinery and even operators face serious risks is the lack of cleanliness of the machines. The first reason that makes the machines of a printing house wor...

Warning about UV-stained Cloths

November 2024- 929 views

UV-stained clothes, if taken home and even washed separately, may damage the health of entire family. It is necessary that the clothes be washed as much as possible in the printing house. Please keep ...

Avoid Using the Same Gallons for Alcohol, Fountain Solution, ..

November 2024- 916 views

Avoid using the same gallons for Alcohol, Fountain Solution, Washing Solutions and etc. This may cause serious damages to press machines. Add a caption to enhance the meaning of this image. Add a capt...

Feeder & Delivery

November 2024- 811 views

In Farsi there is a common mistake. Sometimes Feeder and Delivery are being mistaken. Add a caption to enhance the meaning of this image. Add a caption to enhance the meaning of this image. Add a capt...

Be Careful on Ink- Water Balance

November 2024- 866 views

Balancing between ink and water is very important. Please be careful about that. Add a caption to enhance the meaning of this image. Add a caption to enhance the meaning of this image....

Avoid Using Non-Standard Consumables.

November 2024- 1071 views

Avoid using non-standard consumables in press machines, This will damage your machime. Add a caption to enhance the meaning of this image. Add a caption to enhance the meaning of this image. Add a cap...

Avoid Using Non-Standard Plates

November 2024- 889 views

Non-standard plates may produce low quality images. Also power consumption will increase. Plate producing speed goes low. And there will be so many bad effects on plates and images. Add a caption to e...

Important points in standard pre-press environmental conditions

November 2024- 920 views

Important points in standard pre-pr ess environmental conditions 1. Use of the device at 20 to 25 °C and humidity below 30% 2. Isolating the environment to dust 3. Avoid direct sunlight on devices and...

Recommendations for Extending the Life of Pre-press Machines

November 2024- 842 views

Recommendations for extending the life of pre-press machines are as below: 1. Use online UPS for platesetter 2. Using stabilizer for plate processor 3. Equipping compressor to dryer system 4. Using an...

How to Work Efficiently with Prepress Devices?

November 2024- 916 views

Important points of service and maintenance of prepress machines to be done by operators: 1- Cleaning of all filters on a regular weekly and monthly basis 2- Using plates and compatible chemicals 3- C...

The Reasons of Weakening Plates-1

November 2024- 1030 views

One of the issues that printers are always struggling with is that they burn plates even for mid run length. What is a solution? Cases that weaken the plate in the printing process, standardized and b...

The Reasons of Weakening Plates-2

November 2024- 4391 views

In the past post, we looked at what causes the plate to be weakened. H ere are other points: 1. Non- Standard Ink 2. Non- Standard additives for ink and water 3. More than enough Alcohol 4. Lint of p ...

About us

Write a small text here to describe your blog or company.

About us

Follow Us

Archives

Archives

Tags

Koenig & Bauer

KODAK

Other Products

Service

Contact Us