.png)
BDG
.jpg "RotaJET_L_4x4_left")
Baumann BDG
Automatic Positioning Systems provide you with a module which permits automatic cutting. Turning and aligning of the reams on the cutter's rear-table as well as the cut(s) themselves are carried out fully automatically. BDG is suitable both for printed and unprinted sheets. The cutting-process and the BDG are controlled by the cutting program.
- The following tasks can be automated
- Turning of the layer by 90° prior to the first cut (while feeding the cutter)
- Turning of the layer by 90° or 180°
- 4-side-trim
- Dividing cuts
- Cutting strips
Possible combinations
- Combination with a pushing system
- Combination with an automatic jogger
- Combination with a gripper transport system BFS / BFS-R
Advantages
- Most important component for the automatic cutting process
- Important increase in productivity
- Relief of the operator's physical strain
- Combination with numerous functional components
- Highly dynamic, enabling a very quick turning and aligning process
- The speed can be adjusted to suit the product
To install this Web App in your iPhone/iPad press
and then Add to Home Screen.
